Prep & store

Mixing Bowl Ø26

Name: Mixing Bowl Ø26
Brand: Servicelab
Price: 325 DKK
Availability: InStock

3.4 litres, a wide pouring lip and a 7 mm section. Heavy on purpose — it stays put.

Designed in DenmarkMade in Poland

DKK 325

Inkl. 25% moms

Dispatched in 1–2 working days. Shipping included over DKK 900.
14 days to change your mind — standard withdrawal form supplied.
2 years to raise a fault under the Danish right to complain.
Broken in transit? Report it within 7 days with photographs and we replace it.

Count a whole service

01Measured

Measured dimensions of the Mixing Bowl Ø26
Outer diameter	260 mm
Internal depth	120 mm
Height, single piece	132 mm
Stacking pitch	52 mm per extra piece
Ten pieces stand	600 mm
Rim section	7.0 mm
Weight	1.65 kg
Capacity	3.40 L

These are thrown pieces, so a tolerance of ±5% applies to every dimension above. Slight variation in the glaze surface, and the small pinholes that come with a satin glaze, are characteristics of the firing rather than faults.

03Food contact

Glaze

Charcoal satin SL-G1 — lead-free and cadmium-free feldspathic glaze, single-fired to 1,240 °C. Foot ring left unglazed.

Migration limits applied

Category 3 — cooking ware and bulk vessels

Cooking ware, and packaging or storage vessels holding more than 3 litres.

Lead ≤ 1.5 mg/L · Cadmium ≤ 0.1 mg/L

Declaration of compliance

DoC/SL-2026/MIXING-BOWL-26

Issued under Regulation (EC) 1935/2004 and Council Directive 84/500/EEC. A copy is sent on request to support@ancherstudio.shop.

Marking

Each piece ships with the glass-and-fork symbol for food contact on its packaging.

The three limit categories, and how a piece is assigned to one

02Tested

Thermal shock — SL-TS-02

30 cycles

at ΔT 120 °C

Sample pieces are held at 20 °C, moved into a fan oven at 140 °C and held for 30 minutes. Each piece is then transferred directly into a 20 °C water bath and left for 60 seconds. That is one cycle.

Dishwasher — SL-DW-01

1,100 cycles

65 °C wash / 85 °C rinse

Alkaline machine detergent dosed at 3 g/L with a rinse aid, water hardness 8 °dH. The published figure is the number of cycles completed before gloss fell by more than 5 units or any dimension moved beyond ±0.5 mm.

Measured on sample pieces from a production batch under the conditions set out on the durability testing page. Your own results depend on how the piece is handled, loaded and washed. These figures come from the workshop’s own testing rather than from a third-party certification body; the test log is available on request. Both protocols in full, and what they do not claim

05Resupply

Status: Restocked as a matter of course
Glaze batch shipping now: G1-2604

We restock what is in the current range and we tell you in advance when something is stopping. What we will not do is promise a piece will be available indefinitely — a workshop that says that is making a promise about a decade it cannot see. Where the promise stops

04Where it can go

Microwave: Yes
Dishwasher: Yes
Oven: No
Freezer: Yes

Fired stoneware moves when the temperature moves. Let a piece come to room temperature before it goes into a hot oven, and let it cool on a rack rather than under cold water. Nothing in this range belongs on a hob, under a grill element or over an open flame.