Skip to content
Servicelab
Café Opening Set — charcoal glazed stoneware with an unglazed honey-brown clay foot ring.

Sets

Café Opening Set

Twenty-four pieces sized for a small café opening: four cappuccino and four tea cups with their saucers, four pasta bowls, four dinner plates.

Designed in DenmarkMade in Poland

DKK 2,890

Bought one piece at a time these come to DKK 3,160 — the set price is DKK 270 less. The comparison is to our own open-stock prices, shown on the pages linked below.

Inkl. 25% moms

1
Count a whole service

What is in it — 24 pieces

Contents of the Café Opening Set
PieceQuantityOpen stock eachLine total
Cappuccino Cup 220 ml + Saucer4DKK 205DKK 820
Tea Cup 250 ml + Saucer4DKK 195DKK 780
Pasta Bowl Ø224DKK 195DKK 780
Dinner Plate Ø264DKK 195DKK 780
Bought piece by pieceDKK 3,160
As a setDKK 2,890

01Measured

Measured dimensions of the Café Opening Set
Outer diameter260 mm
Internal depth64 mm
Height, single piece68 mm
Stacking pitchDoes not stack
Ten pieces stand—
Rim section5.5 mm
Weight8.08 kg
Capacity—

These are thrown pieces, so a tolerance of ±5% applies to every dimension above. Slight variation in the glaze surface, and the small pinholes that come with a satin glaze, are characteristics of the firing rather than faults.

03Food contact

Glaze
Charcoal satin SL-G1 — lead-free and cadmium-free feldspathic glaze, single-fired to 1,240 °C. Foot ring left unglazed.
Migration limits applied

Category 2 — fillable, deeper than 25 mm

Fillable articles with an internal depth greater than 25 mm and a capacity of 3 litres or less.

Lead ≤ 4.0 mg/L · Cadmium ≤ 0.3 mg/L

Declaration of compliance
DoC/SL-2026/CAFE-OPENING-SET
Issued under Regulation (EC) 1935/2004 and Council Directive 84/500/EEC. A copy is sent on request to support@ancherstudio.shop.
Marking
Each piece ships with the glass-and-fork symbol for food contact on its packaging.
The three limit categories, and how a piece is assigned to one

02Tested

Thermal shock — SL-TS-02

30 cycles

at ΔT 120 °C

Sample pieces are held at 20 °C, moved into a fan oven at 140 °C and held for 30 minutes. Each piece is then transferred directly into a 20 °C water bath and left for 60 seconds. That is one cycle.

Dishwasher — SL-DW-01

1,300 cycles

65 °C wash / 85 °C rinse

Alkaline machine detergent dosed at 3 g/L with a rinse aid, water hardness 8 °dH. The published figure is the number of cycles completed before gloss fell by more than 5 units or any dimension moved beyond ±0.5 mm.

Measured on sample pieces from a production batch under the conditions set out on the durability testing page. Your own results depend on how the piece is handled, loaded and washed. These figures come from the workshop’s own testing rather than from a third-party certification body; the test log is available on request. Both protocols in full, and what they do not claim

05Resupply

Status
Restocked as a matter of course
Glaze batch shipping now
G1-2604

We restock what is in the current range and we tell you in advance when something is stopping. What we will not do is promise a piece will be available indefinitely — a workshop that says that is making a promise about a decade it cannot see. Where the promise stops

04Where it can go

Microwave
Yes
Dishwasher
Yes
Oven
No
Freezer
Yes

Fired stoneware moves when the temperature moves. Let a piece come to room temperature before it goes into a hot oven, and let it cool on a rack rather than under cold water. Nothing in this range belongs on a hob, under a grill element or over an open flame.

Rest of the sets